قالب وردپرس درنا توس
Home / Insurance / Dirty basement sump pump disasters you need to prevent

Dirty basement sump pump disasters you need to prevent



Whether you have a crawl space or a basement, swamp pump disasters are no laughing matter. When things go wrong you can get major damage or mold and mildew.

Like all systems in your home, your sump pump may suddenly shut down. Here are some common faults in the sump pump and ways to prevent them from turning into disasters.

Water damage and sump pumps


A sump pump can help if your crawl space or basement is exposed to flooding. With a sump pump, all the water in your basement flows down into a sump pit. The pump is activated and begins to push water away from your home through a drain pipe.

This is how things are shall works, but sometimes they do not. So what can go wrong?

Electrical fault


Most sump pumps run on normal household power. If the power goes out, your sump pump will not work, which can cause major problems during a strong storm.

How do you get around this problem? Install a combined sump pump that includes a battery-powered backup system, or purchase a separate battery backup pump to support the pump you already have.

Too much water


Sump pumps are valued according to horsepower (HP) and according to how many liters of water per hour (GPH) they can move. How much electricity you need depends on where you live and the size of your basement or crawl space.

A large home in a dry area probably does not need the same pump as a small home in an area with heavy flooding. You should choose a sump pump that is strong enough to handle the workload. If your pump cannot keep up with the amount of water, you risk having a flooded basement.

Clogged drain pipe


When your sump pump is working properly, water is forced through a pipe and away from your home. For an average pump, it is between 3,500 and 4,000 GPH.

If the drain pipe clogs or freezes, the water has nowhere to go except back into your basement. To prevent this from happening, cover your drain pipe with a grille to keep debris and small animals away.

Use insulating foil or heat tape to limit freezing. If your pipe freezes, use a hair dryer or heater to thaw the ice.

Worn pump


Like all mechanical objects, a sump pump eventually wears out. Be sure to replace your pump if it makes strange noises, turns on and off for no reason, or is more than 7 to 1

0 years old.

Improper maintenance


Just like your heating system or roof, a sump pump requires regular maintenance. You can do some of it on your own.

When working through your quarterly home maintenance list:

  • Check for debris in your swamp.
  • Clean your drain pipe.
  • Make sure the hose connections are secure.
  • Inspect the power cord for damage, creases, or lashes.

The Indiana Foundation Service recommends an annual service visit by a professional to clean and inspect the moving parts of the pump, test batteries, and look for potential problems.

It’s worth the investment


A sump pump is a solid investment. According to Home Advisor, the national average for installing a new sump pump is almost $ 1,200, and the cost of replacing an existing pump is in the range of $ 450 to $ 550.

These prices can vary quite a bit depending on labor, geography and the type of pump you buy. The pumps themselves can range from as little as $ 50 to as much as $ 3,000. Even if you pay for an expensive installation, it’s better than dealing with the cost and frustration of a flooded basement.

A small amount of water can lead to problems with mold, certain species of termites and rotting wood. You may be able to avoid these problems with a sump pump.

We have Home insurance that Can cover the cost of water back-The mail and equipment breakdowns! Get in Pipe with your local, licensed Pekin Insurance agent for more information.




Source link